{"type":"video","version":"1.0","html":"<iframe src=\"https://www.loom.com/embed/18e38af3620549e6bd0db35fd5c09754\" frameborder=\"0\" width=\"1280\" height=\"960\" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>","height":960,"width":1280,"provider_name":"Loom","provider_url":"https://www.loom.com","thumbnail_height":960,"thumbnail_width":1280,"thumbnail_url":"https://cdn.loom.com/sessions/thumbnails/18e38af3620549e6bd0db35fd5c09754-70f82a8f8674b887.gif","duration":591.387,"title":"Timer Logic and Tag Monitoring Basics 🙂","description":"I walked through rung zero logic in our ladder software, focusing on the left and right power rails and the left to right assumption for positive to negative. I showed how a specific output tag tied to card 3 local 3 input data 0, alias input 100, changes from 0 to 1 when toggled, and how the timer behaves after a two second delay. I watched the timer enable and done bits, plus the timer timing bit while it is counting. I then edited the logic to use timer timing instead of the correct bit, noted the immediate latch energizing with no delay, and finalized the edit. No viewer action was explicitly requested."}