{"type":"video","version":"1.0","html":"<iframe src=\"https://www.loom.com/embed/1a1a40dc98d04973abde6cd25e0cf1ea\" frameborder=\"0\" width=\"2560\" height=\"1920\" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>","height":1920,"width":2560,"provider_name":"Loom","provider_url":"https://www.loom.com","thumbnail_height":1920,"thumbnail_width":2560,"thumbnail_url":"https://cdn.loom.com/sessions/thumbnails/1a1a40dc98d04973abde6cd25e0cf1ea-7d6da92a5ca7e6c6.gif","duration":486.733333,"title":"How to Replace J100 Battery Terminals","description":"This Loom explains how to replace the battery terminals on a J100 battery. The speaker removes eight outer screws (2 mm for the smaller lower screws and three mm for the top cap screws), pries off the four rubber caps, and opens the battery like a clamshell, disconnecting the positive lead first, then negative, then two signal harnesses, wrapping leads with tape as removed. The terminal is removed by loosening four screws per terminal set and softening potting with a heat gun if needed, then replacing the potting with waterproof, electrical, heat-resistant silicone and letting it cure for 24 hours. After reassembly in reverse order, the speaker recommends slow-charging for the first three cycles and re-siliconing the two terminal leads."}