{"type":"video","version":"1.0","html":"<iframe src=\"https://www.loom.com/embed/2660a2779bd54824a976c4c4d83e8b07\" frameborder=\"0\" width=\"1920\" height=\"1440\" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>","height":1440,"width":1920,"provider_name":"Loom","provider_url":"https://www.loom.com","thumbnail_height":1440,"thumbnail_width":1920,"thumbnail_url":"https://cdn.loom.com/sessions/thumbnails/2660a2779bd54824a976c4c4d83e8b07-24f584b41bd1e09c.gif","duration":165.44,"title":"Correcting angle measurement for Case 2","description":"Hi guys, it’s me, Authentical Girl, and I wanted to clarify what I fixed for case 2 since I’m not going to be there Tuesday before the lab is due. We had a problem measuring the strength angle with the phone ruler, because keeping the ruler perfectly horizontal gave 0 degrees, and measuring that way gave us about 18 degrees instead of the required angle. The fix was to add 18 plus 90, so the target angle is 108 degrees. I also want someone to confirm the board values I wrote, since I only took my own picture, and I believe it should match a value close to tension equal mass 2 times G with about 3 percent error. Please confirm the board setup and use 57 for data 1 and 108 for data 2."}