{"type":"video","version":"1.0","html":"<iframe src=\"https://www.loom.com/embed/86201eda535a4fa0946a1fb45e930d99\" frameborder=\"0\" width=\"848\" height=\"636\" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>","height":636,"width":848,"provider_name":"Loom","provider_url":"https://www.loom.com","thumbnail_height":636,"thumbnail_width":848,"thumbnail_url":"https://cdn.loom.com/sessions/thumbnails/86201eda535a4fa0946a1fb45e930d99-a6dd0fd020d3390e.gif","duration":241.494,"title":"J150/J70 Gyroscope Value Drift Too Large error 28-047","description":"In this video, I walk you through the steps to recalibrate the gyroscope on your J-150 or J-70 drone if you encounter a calibration error message. This issue can occur if the drone is booted up facing north or east, and it's a straightforward fix. I guide you to turn the drone west, access the advanced settings under UAV, and start the calibration process while keeping the drone still. After calibration, I recommend rebooting both the drone and the CPU to ensure the error message is cleared. If you still see issues, check the RTK settings and make sure everything is properly connected before takeoff."}