{"type":"video","version":"1.0","html":"<iframe src=\"https://www.loom.com/embed/9faa5841ba534fa1b6411f4c957b2a76\" frameborder=\"0\" width=\"1920\" height=\"1440\" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>","height":1440,"width":1920,"provider_name":"Loom","provider_url":"https://www.loom.com","thumbnail_height":1440,"thumbnail_width":1920,"thumbnail_url":"https://cdn.loom.com/sessions/thumbnails/9faa5841ba534fa1b6411f4c957b2a76-d7f4c501060ddd14.gif","duration":387.088333,"title":"Three Phase Wire Clip Installation Steps","description":"This Loom explains how to install a three-phase wire clip by reinstalling and aligning the ESC and its brackets. The video instructs viewers to power off or remove the external power source, remove the foam cover with a 2.5 mm bit, loosen the ESC using a 3 mm bit, and remove four bolts. It then installs the bracket and secures screws with blue lock tight, noting two foam pieces should be placed behind the connection and alignment tabs must line up to avoid pinching wires. Finally, it reinstalls the foam cover, including cutting out a ridge aligned with the ESC using a utility knife or foam cutter, then reinstalling the foam cover with 2.5 mm screws."}