{"type":"video","version":"1.0","html":"<iframe src=\"https://www.loom.com/embed/a85ddf68e8054311b7cc1f198f9325ae\" frameborder=\"0\" width=\"2560\" height=\"1920\" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>","height":1920,"width":2560,"provider_name":"Loom","provider_url":"https://www.loom.com","thumbnail_height":1920,"thumbnail_width":2560,"thumbnail_url":"https://cdn.loom.com/sessions/thumbnails/a85ddf68e8054311b7cc1f198f9325ae-69fca06f0d1e8718.gif","duration":99.467,"title":"17.App Wizard","description":"This Loom explains the app setup flow for a sensor measurement, from selecting the device to starting and validating targets. It begins by finding the device in the available list and launching setup, where the app reminds you to confirm the sensor is rigidly mounted and that power is connected to both connectors, with no extra reflective surfaces on site that could add noise. The app also lets you adjust power settings based on the distance to the farthest target, then starts a measurement that can take up to 20 minutes. After the measurement, it validates targets in the field of view, excludes targets that do not meet a two-degree angle separation, and offers the chance to name targets, such as T1, T2, and T3, before moving on to create the baseline."}