{"type":"video","version":"1.0","html":"<iframe src=\"https://www.loom.com/embed/a9ed3f5d97924435af06a3aed037a807\" frameborder=\"0\" width=\"1920\" height=\"1440\" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>","height":1440,"width":1920,"provider_name":"Loom","provider_url":"https://www.loom.com","thumbnail_height":1440,"thumbnail_width":1920,"thumbnail_url":"https://cdn.loom.com/sessions/thumbnails/a9ed3f5d97924435af06a3aed037a807-bb01a1a3cf91f9a2.gif","duration":340.088,"title":"How to Add a Seal to Wavy Flags","description":"This Loom explains how to add and engrave a seal onto a CNC made wavy flag kit. The speaker imports the seal SVG, centers the grouped seal inside a reference square, and nudges it slightly smaller to leave a stripe on both sides. In VCarve, they create a VCarve engraving toolpath using a 60 degree V-bit with step over values of 60/30 and a 0.15 inch flat depth, then stress selecting project toolpath onto 3D model before calculating for proper depth variation. They recommend painting black after engraving, and describe finishing options including clear coat shellac or lacquer to prevent wood bleed and noting off-Z issues when carving a finished flag."}