{"type":"video","version":"1.0","html":"<iframe src=\"https://www.loom.com/embed/b33ab65f687345b6a078f9b93fd4e001\" frameborder=\"0\" width=\"1920\" height=\"1440\" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>","height":1440,"width":1920,"provider_name":"Loom","provider_url":"https://www.loom.com","thumbnail_height":1440,"thumbnail_width":1920,"thumbnail_url":"https://cdn.loom.com/sessions/thumbnails/b33ab65f687345b6a078f9b93fd4e001-4330a2bb02a6e305.gif","duration":176.266667,"title":"J-150 and 70 Main Controller Bracket Updates","description":"This Loom explains the changes and improvements to the J-150 and J-70 front main controller brackets. The updated bracket adds a new support beam for structural support, integrated cooling holes to reduce lid heat and friction, and thickens the bracket to prevent brittleness. It also beefs up the areas where bolts were previously breaking by adding more material and recommends using an M4 by 12 flat washer and an M4 by 7 locking washer with a light dab of blue lock tight. Bolts are torqued to a new spec of 3 Newton meters using digital torque wrenches, and the lock tight guidance applies to all six upper bolts as well."}