{"type":"video","version":"1.0","html":"<iframe src=\"https://www.loom.com/embed/bd650b10d1ac4b68882f2f15f2c99fbb\" frameborder=\"0\" width=\"1920\" height=\"1440\" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>","height":1440,"width":1920,"provider_name":"Loom","provider_url":"https://www.loom.com","thumbnail_height":1440,"thumbnail_width":1920,"thumbnail_url":"https://cdn.loom.com/sessions/thumbnails/bd650b10d1ac4b68882f2f15f2c99fbb-ffbfe30755da3a12.gif","duration":194.528,"title":"Update Image Transmission Module for Connection","description":"This Loom explains how to update an image transmission module when the drone and remote are on different firmware versions and the remote cannot initially connect. The presenter logs in to a beta account, goes to Device, then RC, and updates the remote and image transmission module to version 2025-1120, then closes and restarts the app, re-enters pairing mode, and aligns the serial number as needed. After confirming the drone is on 2026 while the remote supports both, they use the upgrade center to upgrade only the image transmission module, which may take 20 minutes to an hour and can appear stuck at 75%. If the update shows failure, they power cycle the drone and remote and retry pairing, then confirm both are on the right version (remote also shows 2025-1102)."}