{"type":"video","version":"1.0","html":"<iframe src=\"https://www.loom.com/embed/d3f357b63505423f8f2f1bf06484ef61\" frameborder=\"0\" width=\"1920\" height=\"1440\" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>","height":1440,"width":1920,"provider_name":"Loom","provider_url":"https://www.loom.com","thumbnail_height":1440,"thumbnail_width":1920,"thumbnail_url":"https://cdn.loom.com/sessions/thumbnails/d3f357b63505423f8f2f1bf06484ef61-79f42b9eaa2bb3e8.gif","duration":358.166667,"title":"J150 Spreader Calibration Step by Step","description":"This Loom explains how to calibrate the J150 spreader on Agar’s Grey Drone, starting with the minimum and maximum spreader flow rate settings. It shows removing the spinner disc using a locking pin and using a trash can under the spreader since calibration empties material. In the app flight screen under spreader settings, it begins minimum flow rate calibration at 50 seconds with the auger speed at the minimum, then requires weighing the collected material on a secondary scale to update the spreader weight. After refilling, it runs maximum calibration with the time decreased and material set to 300, again weighing afterward to finish and save the template."}