{"type":"video","version":"1.0","html":"<iframe src=\"https://www.loom.com/embed/ef6978cad61841a58389db5c878f4a47\" frameborder=\"0\" width=\"1920\" height=\"1440\" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>","height":1440,"width":1920,"provider_name":"Loom","provider_url":"https://www.loom.com","thumbnail_height":1440,"thumbnail_width":1920,"thumbnail_url":"https://cdn.loom.com/sessions/thumbnails/ef6978cad61841a58389db5c878f4a47-4f0f4e0a94ff9f65.gif","duration":282.548933,"title":"How to Replace a J150 Solenoid Valve","description":"This Loom explains how to remove and reinstall a J150 electromagnetic valve or solenoid. It starts by removing four 2.5 mm bolts, then snipping zip ties carefully without cutting the tubes, and loosening the hose nut with pliers if needed, watching for liquid if the pipes are not fully drained. The solenoid is pulled out by pushing the clip in and unplugging it, then the new or reused solenoid is plugged back in until it clips and screwed in snugly. The hoses are seated and tightened by hand, and the zip ties are replaced and trimmed."}