video1.0<iframe src="https://www.loom.com/embed/45f74eaccf9c4366858f1118bd8bd9ef" frameborder="0" width="1920" height="1440" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>14401920Loomhttps://www.loom.com14401920https://cdn.loom.com/sessions/thumbnails/45f74eaccf9c4366858f1118bd8bd9ef-4ded4e40bf49d8e6.gif1041.797In this video, I walk you through the process of replacing the top radar, LiDAR, and FPV camera on the J150. We start by loosening four 3 mm hex head bolts to remove the top cover, followed by detaching the radar and LiDAR units, which are secured with additional screws. I also share insights on transferring brackets and gaskets when replacing LiDAR. For the FPV camera, I demonstrate how to install it using a new 3D printed bracket to prevent static charge issues. Please make sure to follow the steps carefully and reach out if you have any questions during the process.