video1.0<iframe src="https://www.loom.com/embed/4f94096d111946a08817efbf8dad171b" frameborder="0" width="1280" height="960" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>9601280Loomhttps://www.loom.com9601280https://cdn.loom.com/sessions/thumbnails/4f94096d111946a08817efbf8dad171b-3a8a42a80edc6ff6.gif300.61Now that we are through our nest selection, I show how to select either the left or right nest and enable auto mode so the machine gets control power. Then I walk through the light curtain cross reference and how it must confirm the curtain is clear, with a 100 millisecond timer, before the machine can run. If the curtain is blocked, the logic drops out and starts a timer so the light curtain status changes. Finally, I cover machine home after lost power, meaning all cylinders must go back home before restarting an auto cycle. No specific viewer action was requested.