video1.0<iframe src="https://www.loom.com/embed/9d0c13fc042b47e3929bc0634acffa19" frameborder="0" width="3018" height="2263" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>22633018Loomhttps://www.loom.com22633018https://cdn.loom.com/sessions/thumbnails/9d0c13fc042b47e3929bc0634acffa19-4f669c66c61d8428.gif583.595This Loom explains how to set up scheduled equipment maintenance based on engine hours for generator repairs. It starts by creating a usage meter named Engine Hours, assigning it to the generator class, and then building two repair procedures: a 100 Hour Generator Check and a Regular generator maintenance procedure on the Preventative Maintenance board, including work checklist steps like oil change, battery test, air filter replacement, and a signature. Finally, it assigns a maintenance schedule to the generator class to trigger every 100 engine hours. When an asset is logged at 105 hours, it appears as due for preventative maintenance and opens the work checklist for completion.