video1.0<iframe src="https://www.loom.com/embed/fb45c1b4bec74b1a8e57b71be7965c31" frameborder="0" width="1432" height="1074" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>10741432Loomhttps://www.loom.com10741432https://cdn.loom.com/sessions/thumbnails/fb45c1b4bec74b1a8e57b71be7965c31-a1a34a0448b9cf8c.gif367.408In this videoI show how I create a new design in Helioscope, then zoom to the roof surfaces and set a field segment by clicking roof areas and closing the shape. I choose module orientation with roof edge azimuth, set landscape or portrait, and add setbacks, then create keepouts with module setbacks and height to model shade. I pan in 3D to verify, recenter to overhead view, right click modules to remove or restore, and adjust keepout shade. I run calculate shading and use blue and red results to identify underperforming modules. I then move to the electrical tab to select an inverter. No viewer action was requested.