video1.0<iframe src="https://www.loom.com/embed/fb5c511d44724c29a7e8782beb929a00" frameborder="0" width="1920" height="1440" webkitallowfullscreen mozallowfullscreen allowfullscreen></iframe>14401920Loomhttps://www.loom.com14401920https://cdn.loom.com/sessions/thumbnails/fb5c511d44724c29a7e8782beb929a00-f65be23699bfffe7.gif646.312333This Loom explains how to remove and reinstall a nozzle assembly on a J150. It covers cutting the necessary material without cutting the pipe, unplugging the wires, removing the hose, and taking off the nozzle using four 2.5 mm bolts while carefully feeding the two wires and orange wire through the top slit. For reinstallation, the nozzle assembly is reattached with the four 2.5 mm bolts, the solenoid is replugged and snugged, the bottom hose is reinstalled, and the correct outside and inside nozzles and power cords are connected. It also emphasizes checking zip ties, bolt presence, and that the solenoid and nozzle do not move or twist.